| DC-Integra |
|
DC Integra supports an integrated foundation engineering statics for an overview of the layout of single excavation wall sections to their analysis and the display of the results. To analyze the single wall types DC-Integra processes with the programs:
Starting from a layout, which is either already existing and imported with DXF import from CAD, or may directly be created in DC Integra with the extensive CAD tools, you may manage different types of walls of an entire construction pit and make the required analysis with the relevant calculating programs.
You may assign different wall types to separate outlines of the construction pit:
The single walls are precisely displayed in the layout with macro functions. By means of these functions you may define the relevant parameters as e.g. diameter and spacing of bore piles, girder types and spacing, sheet piling profiles, etc. Variable macros are automatically recreated again, if you modify the position and the direction of the outlines. You may flexibly and precisely display the lining situations by shortening and lengthening the lining area. The program enables you thus e.g. to bond sheet pilings into bore pile walls. All preferred analysis sections are defined in the layout. Depending on the lining type DC Integra immediately creates the assignment to the relevant analysis program: DC Pit, DC Underpinning, DC Nail or DC Slope. DC Integra directly manages global information such as the layer thickness and parameters, the ground water level, etc. Having additionally assigned information about the data to the single outlines (depth outside and inside the construction pit), the program transfers the whole information about the geometry and the type to the relevant analysis program. It is thus possible to forward also information about inclined construction pit walls or slopes, by linking several lines in the layout by a section line. The analysis is started by the displayed section. The branching into the relevant analysis program is made automatically. This program displays the transferred information graphically and enables the after-treatment in order to define the excavation stages, anchor positions, etc. Having performed and estimated the analysis, you may integrate the preferred result images (system graphic, earth and water pressures, section forces and deformations) directly on the layout depending on the load case and the excavation. It is possible to edit at any time the result graphics such as shifting, scale change or automatic update in case of DC Software DC Integra 6. A permanent overview of all sections of a project and the management of the whole system through the layout is possible with this conception of the integrated foundation engineering statics. You do not need to treat single sections separated from the entire project, you may clearly see all the components coherently. With DC Integra 3D a complete 3D model of the construction pit may be created, with photo-realistic display of the wall types with different materials. Slopes between sections of different depths are created automatically with their intersections. Brochure
Video |
BROCHURE_DC_INTEGRA.pdf 
DCIntegra3D_E.wmv